Fermentis SafCider™ AB‑1 Active Dry Cider Yeast
THE RIGHT CHOICE FOR BALANCED CIDER
Ensures a very good assimilation of fructose and excellent for low gravity ciders.
SafCider™ AB-1 the best cider yeast for balanced ciders, combing delicate fresh apple and applesauce notes.
Ingredients: Yeast (Saccharomyces cerevisiae), emulsifier; sorbitan monostearate (E491)
DOSAGE
– 10 to 20 g/hl for first fermentation
– 30 to 40 g/hl for prise de mousse
USAGE
For all types of sweet & dry ciders from fresh or concentrated apple juices - recommended even under difficult fermentation conditions.
REHYDRATION PROCEDURE
Direct inoculation:
– Pour the yeast on the surface of at least 10 times their weight of must (possibly directly on the top of the tank or during tank filling after clarification).
– Gently stir to avoid or break clumps.
– Immediately transfer into the tank via a pumping over with aeration (or homogenize tank volume).
With prior rehydration:
– Pour the yeast on the surface of 10 times their weight of tap water at room temperature.
– Gently stir to avoid or break clumps.
– Wait for 20 minutes and transfer into the tank via a pumping over with aeration.
TECHNICAL CHARACTERISTICS
– Excellent settlement strength even with its sensitive to killer phenotype
– Regular kinetic
– Broad fermentation temperature spectrum: 10-30°C (50-86°F)
– Very low nitrogen requirements: Ratio YAN**(mg/L)/Sugar(g/L) > 0.7
– Very good assimilation of fructose
– Maximum initial SO2 level recommended: 125mg/L
– High malic acid consumption (up to 1.5 g/L)
– Medium 2-phenylethanol and isoamyl acetate producer.
- Amylic notes can be enhanced especially when YAN/Sugar >1
THE RIGHT CHOICE FOR BALANCED CIDER
Ensures a very good assimilation of fructose and excellent for low gravity ciders.
SafCider™ AB-1 the best cider yeast for balanced ciders, combing delicate fresh apple and applesauce notes.
Ingredients: Yeast (Saccharomyces cerevisiae), emulsifier; sorbitan monostearate (E491)
DOSAGE
– 10 to 20 g/hl for first fermentation
– 30 to 40 g/hl for prise de mousse
USAGE
For all types of sweet & dry ciders from fresh or concentrated apple juices - recommended even under difficult fermentation conditions.
REHYDRATION PROCEDURE
Direct inoculation:
– Pour the yeast on the surface of at least 10 times their weight of must (possibly directly on the top of the tank or during tank filling after clarification).
– Gently stir to avoid or break clumps.
– Immediately transfer into the tank via a pumping over with aeration (or homogenize tank volume).
With prior rehydration:
– Pour the yeast on the surface of 10 times their weight of tap water at room temperature.
– Gently stir to avoid or break clumps.
– Wait for 20 minutes and transfer into the tank via a pumping over with aeration.
TECHNICAL CHARACTERISTICS
– Excellent settlement strength even with its sensitive to killer phenotype
– Regular kinetic
– Broad fermentation temperature spectrum: 10-30°C (50-86°F)
– Very low nitrogen requirements: Ratio YAN**(mg/L)/Sugar(g/L) > 0.7
– Very good assimilation of fructose
– Maximum initial SO2 level recommended: 125mg/L
– High malic acid consumption (up to 1.5 g/L)
– Medium 2-phenylethanol and isoamyl acetate producer.
- Amylic notes can be enhanced especially when YAN/Sugar >1
THE RIGHT CHOICE FOR BALANCED CIDER
Ensures a very good assimilation of fructose and excellent for low gravity ciders.
SafCider™ AB-1 the best cider yeast for balanced ciders, combing delicate fresh apple and applesauce notes.
Ingredients: Yeast (Saccharomyces cerevisiae), emulsifier; sorbitan monostearate (E491)
DOSAGE
– 10 to 20 g/hl for first fermentation
– 30 to 40 g/hl for prise de mousse
USAGE
For all types of sweet & dry ciders from fresh or concentrated apple juices - recommended even under difficult fermentation conditions.
REHYDRATION PROCEDURE
Direct inoculation:
– Pour the yeast on the surface of at least 10 times their weight of must (possibly directly on the top of the tank or during tank filling after clarification).
– Gently stir to avoid or break clumps.
– Immediately transfer into the tank via a pumping over with aeration (or homogenize tank volume).
With prior rehydration:
– Pour the yeast on the surface of 10 times their weight of tap water at room temperature.
– Gently stir to avoid or break clumps.
– Wait for 20 minutes and transfer into the tank via a pumping over with aeration.
TECHNICAL CHARACTERISTICS
– Excellent settlement strength even with its sensitive to killer phenotype
– Regular kinetic
– Broad fermentation temperature spectrum: 10-30°C (50-86°F)
– Very low nitrogen requirements: Ratio YAN**(mg/L)/Sugar(g/L) > 0.7
– Very good assimilation of fructose
– Maximum initial SO2 level recommended: 125mg/L
– High malic acid consumption (up to 1.5 g/L)
– Medium 2-phenylethanol and isoamyl acetate producer.
- Amylic notes can be enhanced especially when YAN/Sugar >1
